Laboratories: Test-Benches and Additional Devices


Test-Benches:
In our laboratories, more than 20 test-benches for variable ranges of power, torque, and speed are available. All of the test-benches are designed for 4Q-operation and are provided with high-precision measurement equipment for speed and torque.
Some of most specific importance are the following test-benches, of which detailed data and characteristics are provided at: test-benches (pdf)
(April 2014)

Test-Bench #1:
P = 125 kW, T = 570 Nm, n = 2.100 min-1 / nmax = 33.000 min-1
Test-Bench #2:
P = 75 kW, T = 160 Nm, n = 4.500 min-1 / nmax = 11.000 min-1
Test-Bench #3:
P = 33 kW, T = 33 Nm, n = 9.260 min-1 / nmax = 13.500 min-1
Test-Bench #4:
P = 222 kW, T = 2.000 Nm, n = 1.060 min-1 / nmax = 2.000 min-1
Test-Bench #5:
P = 222 kW, T = 2.000 Nm, n = 1.060 min-1 / nmax = 24.000 min-1
Test-Bench #6:
P = 222 kW, T = 2.000 Nm, n = 1.060 min-1 / nmax = 32.000 min-1
Test-Bench #7:
P = 222 kW, T = 2.000 Nm, n = 1.060 min-1 / nmax = 14.000 min-1
Test-Bench #8: (Ultra-High-Speed Test-Bench)
P = 38 kW, T = 30 Nm, n = 12.100 min-1 / nmax = 140.000 min-1
Test-Bench #9:
P = 131 kW, T = 800 Nm, n = 1.570 min-1 / nmax = 32.000 min-1
Test-Bench #10:
P = 131 kW, T = 800 Nm, n = 1.570 min-1 / nmax = 14.000 min-1


Roller Dynamometer Test-Bench: (Virtual Tour)

Roller Dynamometer Test-Bench MSR 1000 by MAHA
- Front- / Rear- / All-wheel drive selectable
- Maximum speed >300 km/h
- Wheel performance 2x about 700 kW
- Traction force 2x about 8600 N
- Gauge from 900 mm to 2300 mm
- Integrated cooling air blower AIR 7/5 with system performance
   adaption to the driving speed
- 4 analog inputs +-10 V for external measurement
- 2 interface connections for pressure sensors
- 2 interface connection for temperature sensors
- Environment module (e.g. to measure air
   pressure / humidity / room temperature, etc.)


Additional Devices (selection):

Special Voltage-Supplies for different DC-
and 3-phase-AC-Voltages
(for 4Q-operation each):

e.g.:
DC: 0 ... 800 V, +-0 ... 1000 A, 200 kW
DC: 0 ... 800 V, +-0 ... 600 A, 160 kW (2*, in parallel operation 320 kW)
DC: 0 ... 800 V, +-0 ... 600 A, 320 kW (2*, in parallel operation 640 kW)
DC: 0 ... 450 V, +-0 ... 250 A, 100 kW
AC-3ph: 0 ... 500 V, 10 ... 100 Hz, 100 kW
AC-3ph: 0 ... 500 V, 10 ... 400 Hz,   50 kW
AC-3ph: 0 ... 500 V, 10 ... 500 Hz,   30 kW

Controllable Cooling Systems:
Pmax = 13 kW, Φmax = 60 Liter/min, θ = -35 ... +90 °C
Pmax = 10 kW, Φmax = 24 Liter/min, θ = -35 ... +90 °C
Pmax =   5 kW, Φmax = 15 Liter/min, θ = -35 ... +90 °C

High-Precision Powermeters:
Yokogawa 500
Yokogawa 1600
Yokogawa 1800
Yokogawa 3000
(Each with Danfysik precision current transducers 50-1000 A, customizable to specific requirements. Transducers are integrated into four-channel-setups with optional EMI-shielding.)

Oscilloscopes:
Le Croy LT264M (1 GS/s, 350 MHz)
Le Croy 44XS (2,5 GS/s, 400 MHz)
Le Croy HDO4024 (2,5 GS/s, 200 MHz)

dSpace:
Rapid Prototyping

Loads:
Active and passive RLC-Loads

Measurement Data Processing:
High-performance PCs with LabVIEW-environment and customized modules for all common
measurement devices via IEEE-Bus, CAN-Bus or RS232/485-interfaces as well as dedicated
A/D- and D/A-converters for input and output.
Test-Benches can be partially automated.

Temperature Measurement:
Precision multi-amplifiers for thermocouples type K and Pt 100
Rotating wireless transducers for measurement data, suitable for measurement of rotor temperatures
Contactless pyrometric measurement system
FLIR Infrared-camera

Data Handling:
Ethernet 100MB via CAT5 and fiber optic cable
CAN-Bus setup
Connection to WINNET