Puplikation

About The Importance Of Modelling And Simulation For Cognitive Technical Systems. (n.d.).

Bauer, S., & Paetzold, K. (2006). Influence of DFX criteria on the design of the product development process. In S. Vajna (Ed.), Proceedings of the 6th Workshop on Integrated Product Development. Magdeburg. Retrieved from https://www.designsociety.org/publication/29341/influence_of_dfx_criteria_on_the_design_of_the_product_development_process

Braun, F., Kreimeyer, M., Kopal, B., & Paetzold, K. (2017). Herausforderungen in der Validierung der Variantenbeschreibung komplexer Produkte. In DFX 2017: Proceedings of the 28th Symposium Design for X, 4-5 October 2017, Bamberg, Germany (pp. 61–74). Bamberg, Germany: The Design Society.

Chahin, A., & ??? E. (2016). Unveröffentlicht: An approach for using the FMEA and Network-Theory for the development of a novel rotation piston engine.

Chahin, A., Hoffmeister, J., Paetzold, K., Noori, N., & Cardona, X. V. (2016). A Practical Approach to Structure the Product Development Process using Network Theory. In 14th International Design Conference.

Chahin, A., Hoffmeister, J., Paetzold, K., & Salehi, V. (2016). Prerequisites for the Modelling and Analysis of a Product Development Process Using Network Theory. In Complex Systems Design & Management (Vol. 7, p. 235).

Chahin, A., & Paetzold, K. (2015). Analyse des Produktentwicklungsprozesses mit Methoden der komplexen Netzwerktheorie. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2015: 26th Symposium on Design for X (pp. 301–310). Herrsching: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/38411/analyse_des_produktentwicklungsprozesses_mit_methoden_der_komplexen_netzwerktheorie

Chamas, M. W., & Paetzold, K. (2018). Modeling of Requirement-Based Effect Chains of Mechatronic Systems in Conceptual Stage. IJEETC.

Erbe, T., Weber, C., & Paetzold, K. (2011). Actuation principle selection: An example for trade-off assessment by CPM-approach. In S. J. Culley, B. . Hicks, T. C. McAloone, T. J. Howard, & J. Malmqvist (Eds.), ICED11: 18th International Conference on Engineering Design (pp. 222–229). Copenhagen. Retrieved from https://www.designsociety.org/publication/30548/actuation_principle_selection_–_an_example_for_trade-off_assessment_by_cpm-approach

Flexible Process Execution within Product Development Projects - the ProcessNavigator. (n.d.).

Forsteneichner, C., Metschkoll, M., & Paetzold, K. (2016). Modellierung eines durchgängigen Prozesses zur virtuellen Absicherung von Produkteigenschaften. In Berechnung und Simulation: Anwendungen - Entwicklungen - Trends: 3. NAFEMS DACH Regionalkonferenz: unabhängig - übergreifend - neutral (pp. 241–244). Bamberg.

Forsteneichner, C., Paetzold, K., & Metschkoll, M. (2015). Methodische Vorgehensweise zur Verifikation und Validierung komplexer Systeme. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2015: 26th Symposium on Design for X (pp. 145–156). Herrsching: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/38398/methodische_vorgehensweise_zur_verifikation_und_validierung_komplexer_systeme

Gericke, K., Meißner, M., & Paetzold, K. (2013). Understanding the context of product development. In U. Lindemann, S. Venkataraman, Y. S. Kim, S. W. Lee, J. Clarkson, & G. Cascini (Eds.), ICED13: 19th International Conference on Engineering Design (pp. 191–200). Seoul. Retrieved from https://www.designsociety.org/publication/34914/understanding_the_context_of_product_development

Guaragni, F., Schmidt, T., & Paetzold, K. (2016). Traditional and Agile Product Development in a Hyperconnected World: Turning Weaknesses into Strengths. Procedia CIRP, 52, 62–67. https://doi.org/10.1016/j.procir.2016.07.020

Hochmuth, R., & Paetzold, K. (2001). Der Einfluss von Fertigungsabweichungen und elastischen Deformationen auf das kinematische Verhalten eines Kunststoffgetriebes. In H. Meerkamm (Ed.), DFX 2001: 12th Symposium on Design for X (pp. 49–56). Retrieved from https://www.designsociety.org/publication/27546/der_einfluss_von_fertigungsabweichungen_und_elastischen_deformationen_auf_das_kinematische_verhalten_eines_kunststoffgetriebes

Jahn, J., Paetzold, K., & Gaudl, M. (2016). Normenrevision im Landeanflug: Die Veränderungen an der geplanten EN 9100:2016 sind bereits bekannt. QZ - Qualität Und Zuverlässigkeit, 61(4), 42–43.

Kahlert, M., Paetzold, K., & Schweiger, W. (2003). Konzept und Architektur für einen mechatronischen Effektkatalog. In Innovative Produktentwicklung: 5. VDI-Mechatroniktagung 2003 (pp. 145–161). VDI-Verlag. Retrieved from http://cat.inist.fr/?aModele=afficheN&cpsidt=15152753

Kößler, J., & Paetzold, K. (2014). Abbildung von Baugruppen mit Hilfe des CPM-Ansatzes in einem PDM-System. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2014: 25th Symposium on Design for X (pp. 337–348). Bamberg: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/36734/abbildung_von_baugruppen_mit_hilfe_des_cpm-ansatzes_in_einem_pdm-system

Kößler, J., & Paetzold, K. (2015a). Erstellung von Verhaltensmodellen mithilfe einfacher Dimensionierungsberechnungen. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2015: 26th Symposium on Design for X (pp. 99–108). Herrsching: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/38394/erstellung_von_verhaltensmodellen_mithilfe_einfacher_dimensionierungsberechnungen

Kößler, J., & Paetzold, K. (2015b). Support of the system integration with automatically generated behaviour models. In C. Weber, S. Husung, G. Cascini, M. Cantamessa, D. Marjanovic, & M. Bordegoni (Eds.), ICED15: 20th International Conference on Engineering Design (Vol. 11, pp. 21–30). Milan, Italy: Design Society. Retrieved from https://www.designsociety.org/publication/38007/support_of_the_system_integration_with_automatically_generated_behaviour_models

Kößler, J., & Paetzold, K. (2016a). Organisatorische Unterstützung der Produktentwicklung mit SysML-Modellen. In Entwerfen Entwickeln Erleben 2016 (pp. 199–212). Ralph Stelzer.

Kößler, J., & Paetzold, K. (2016b). Supporting SysML model generation in early phases of the development process. In NordDesign 2016.

Kößler, J., & Paetzold, K. (2017). Integration of MBSE into existing development process - expectations and challenges. In 21st International Conference on Engineering Design. Vancouver.

Kößler, J., Reitmeier, J., & Paetzold, K. (2014a). Implementation and automation of the characteristic- property-concept within a PDM-system. In M. Laakso & K. Ekman (Eds.), NordDesign 2014 (pp. 734–743). Espoo. Retrieved from https://www.designsociety.org/publication/36317/implementation_and_automation_of_the_characteristic_property-concept_within_a_pdm-system

Kößler, J., Reitmeier, J., & Paetzold, K. (2014b). Umsetzung einer eigenschaftsbasierten Simulationsplanung in einem PDM-System. In R. Stelzer (Ed.), Entwerfen Entwickeln Erleben 2014: Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik (pp. 113–126). Dresden: TUDpress. Retrieved from http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-144963

Krehmer, H., & Paetzold, K. (2008). Eine Betrachtung zur ganzheitlichen Abschätzung des Produktreifegrads auf Basis des Verhaltens. In H. Meerkamm (Ed.), DFX 2008: 19th Symposium on Design for X (pp. 67–78). Retrieved from https://www.designsociety.org/publication/27406/eine_betrachtung_zur_ganzheitlichen_absch%E4tzung_des_produktreifegrades_auf_basis_des_verhaltens

Krüger, D., Eilmus, S., Schmidt, J., Wartzack, S., Krause, D., & Paetzold, K. (2011). Notwendigkeit für eine Methodenplattform zur Entwicklung von Produkten für nutzerspezifische Mobilitätsbedürfnisse. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2011: 22nd Symposium on Design for X (pp. 265–276). Tutzing: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/32456/notwendigkeit_f%FCr_eine_methodenplattform_zur_entwicklung_von_produkten_f%FCr_nutzerspezifische_mobilit%E4tsbed%FCrfnisse

Krüger, D., Wartzack, S., Eilmus, S., Krause, D., Walter, J., & Paetzold, K. (2013). Methodische Entwicklung mobilitätserhaltender Produkte am Beispiel einer Aufstehhilfe. In D. Spath, B. Bertsche, & H. Binz (Eds.), Stuttgarter Symposium für Produktentwicklung 2013 (pp. 1–10). Stuttgart. Retrieved from https://www.mfk.uni-erlangen.de?file=pubmfk_56446286ad242

Lehnen, J., Schmidt, T. S., & Herstatt, C. (2016). Bringing Agile Project Management into Lead User Projects. International Journal of Project Management, 21(unveröffentlich), 212–232.

Luft, T., Reitmeier, J., Wartzack, S., & Kristin, P. (2014). Uncertainty considerations by context factors for the monitoring of the degree of product maturity. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2014: 13th International Design Conference (pp. 1319–1328). Dubrovnik. Retrieved from https://www.designsociety.org/publication/35234/uncertainty_considerations_by_context_factors_for_the_monitoring_of_the_degree_of_product_maturity

Meerkamm, H., & Paetzold, K. (2003). Zur Optimierung der Getriebesteifigkeit von WAVE DRIVE®-Getrieben. In Dresdner Maschinenelemente Kolloquium (pp. 225–236). Dresden.

Meerkamm, H., Paetzold, K., Schweiger, W., & Shi, B. (2002). A multiple-view integration approach to innovative product design. In Proceedings of the International Conference on Mechanical-Electronic Engineering and Computer Application. Hongkong.

Nitsch, V., & Paetzold, K. (2015). Empirische Validierung des Leistungs-Unterstützungs-Ansatzes zur generationengerechten Produktentwicklung. In H. Binz, B. Bertsche, W. Bauer, & D. Roth (Eds.), Stuttgarter Symposium für Produktentwicklung 2015. Stuttgart. Retrieved from https://www.researchgate.net/publication/282148499_Empirische_Validierung_des_Leistungs-Unterstutzungs-Ansatzes_zur_generationengerechten_Produktentwicklung

Omiciuolo, M., Paetzold, K., Baader, M., Thiel, M., & Förster, K.-P. (2016). Trade-Off for Space Mechanisms Actuator Technology via a General Purpose Language and Domain Specific Simulations Framework. In New Trends in Mechanisms and Machine Science: Theory and Industrial Application. Springer.

Omiciuolo, M., Thiel, M., Forster, K.-P., Paetzold, K., & Forstner, R. (2015). General purpose modeling and domain specific simulation: A framework for space mechanisms design. In 2015 Annual IEEE Systems Conference (SysCon) Proceedings (pp. 802–809). Vancouver: IEEE. https://doi.org/10.1109/SYSCON.2015.7116849

Paetzold, K. (2000a). Zum Einfluss geometrischer Abweichungen auf die Kinematik von Wellgetrieben. In DFX 2000: 11th Symposium on Design for X. Retrieved from https://www.designsociety.org/publication/27526/zum_einfluss_geometrischer_abweichungen_auf_die_kinematik_von_wellgetrieben

Paetzold, K. (2000b). Zum Einfluss geometrischer Abweichungen auf die Kinematik von Wellgetrieben. In H. Meerkamm (Ed.), DFX 2000: 11th Symposium on Design for X (pp. 45–50). Retrieved from https://www.designsociety.org/publication/27526/zum_einfluss_geometrischer_abweichungen_auf_die_kinematik_von_wellgetrieben

Paetzold, K. (2004a). Die Auslegung von Wellgetrieben aus Kunststoff am Beispiel des WAVE DRIVE-Getriebes. Düsseldorf: VDI-Verl. Retrieved from http://opac.ub.tum.de/InfoGuideClient.tumsis/start.do?Login=wotum&Query=540=%223-18-337501-X%22

Paetzold, K. (2004b). Die Auslegung von Wellgetrieben aus Kunststoff am Beispiel des WAVE DRIVE®-Getriebes. Fortschritt-Berichte VDI. VDI-Verlag. Retrieved from https://www.researchgate.net/publication/35902605_Die_Auslegung_von_Wellgetrieben_aus_Kunststoff_am_Beispiel_des_WAVE-DRIVE-Getriebes

Paetzold, K. (2004c). Workflow-Systeme im Produktentwicklungsprozess. In H. Meerkamm (Ed.), DFX 2004: 15th Symposium on Design for X (pp. 55–64). Retrieved from https://www.designsociety.org/publication/27614/workflow-systeme_im_produktentwicklungsprozess

Paetzold, K. (2005). Multidisciplinary Engineering of Cognitive Technical Systems. Nürnberg.

Paetzold, K. (2006a). Ansätze für eine Entwicklungsmethodik für kognitive technische Systeme. In J. Gausemeier, F.-J. Rammig, W. Schäfer, A. Trächtler, & J. Wallaschek (Eds.), Grundlagen, Methoden und Werkzeuge, Mechatronik und Mikrosystemtechnik, Adaption und Selbstoptimierung: 4. Paderborner Workshop Entwurf mechatronischer Systeme. Paderborn: Heinz-Nixdorf-Institut.

Paetzold, K. (2006b). Ansätze für eine funktionale Repräsentation multidisziplinärer Produkte. In H. Meerkamm (Ed.), DFX 2006: 17th Symposium on Design for X (pp. 61–68). Retrieved from https://www.designsociety.org/publication/27651/ansätze_für_eine_funktionale_repräsentation_multidisziplinärer_produkte

Paetzold, K. (2006c). Ansätze zur Repräsentation multidisziplinärer Produkte durch einen Functional Mock-up.

Paetzold, K. (2006d). On the importance of a functional description for the development of cognitive technical systems. In D. Marjanovic (Ed.), DESIGN 2006: 9th International DESIGN Conference (pp. 967–974). Dubrovnik. Retrieved from https://www.designsociety.org/publication/19098/on_the_importance_of_a_functional_description_for_the_development_of_cognitive_technical_systems

Paetzold, K. (2007a). Ethical aspects in the development of cognitive technical systems for providing support in cases of demential diseases. In ICED07: 16th International Conference of Engineering Design (pp. 1–8).

Paetzold, K. (2007b). Integration of learning aptitude into technical systems. In F.-L. Krause (Ed.), The Future of Product Development. 17th CIRP Design Conference (pp. 639–648). Berlin, Heidelberg: Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-540-69820-3

Paetzold, K. (2007c). On the integration of aspects of motivation in cognitive technical systems. In ICED07: 16th International Conference of Engineering Design (pp. 1–10). Paris.

Paetzold, K. (2008). On determining a product’s process related to the degree of maturity. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2008: 10th International Design Conference (pp. 211–218). Dubrovnik. Retrieved from https://www.designsociety.org/publication/26684/on_determining_a_products_process_related_to_the_degree_of_maturity

Paetzold, K. (2009). FORFLOW: Ein holistischer Ansatz zur Prozessunterstützung. In H. Meerkamm (Ed.), Flexible Prozessunterstützung in der Produktentwicklung: Prozesse - Daten - Navigation (pp. 25–42). Shaker Verlag.

Paetzold, K. (2011a). An approach to adapt the product functionality to the abilities of seniors. In M. Ziefle & C. Röcker (Eds.), Human-Centered Design of E-Health Technologies (pp. 127–153). IGI Global. https://doi.org/10.4018/978-1-60960-177-5

Paetzold, K. (2011b). Human-Centered Design of E-Health Technologies. (M. Ziefle & C. Röcker, Eds.). IGI Global. https://doi.org/10.4018/978-1-60960-177-5

Paetzold, K. (2012). Workflowunterstützung in der Produktentwicklung. In F. Rieg & R. Steinhilper (Eds.), Handbuch Konstruktion (pp. 959–979). München: Hanser Verlag.

Paetzold, K. (2015). Network-based product- and process-management for product development. In International Conference on Engineering, Technology and Innovation (ICE) 2015. Belfast.

Paetzold, K., & Erzigkeit, H. (2007). Berücksichtigung von demenziellen Syndromen bei der Gestaltung von kognitiven technischen Systemen für Senioren. In H. Meerkamm (Ed.), DFX 2007: 18th Symposium on Design for X (pp. 43–52). Retrieved from https://www.designsociety.org/publication/27671/berücksichtigung_von_demenziellen_syndromen_bei_der_gestaltung_von_kognitiven_technischen_systemen_für_senioren

Paetzold, K., & Höfner, B. (2014). A contribution to assess the usefullness of products. In A. Meyer, R. Schirmeyer, & S. Vajna (Eds.), Proceedings of the 10th International IDE Jubilee Workshop (pp. 29–36). Gommern. Retrieved from https://www.designsociety.org/publication/38084/a_contribution_to_assess_the_usefulness_of_products

Paetzold, K., & Klämpfl, A. (2009). Ein Ansatz zur Berücksichtigung der Kompetenzen von Senioren in der Entwicklung technischer Systeme. In U. Norell Bergendahl, Margareta; Grimheden, M.; Leifer, Larry; Skogstad, P.; Lindemann (Ed.), 2. Deutscher AAL-Kongress: Technologien, Anwendungen. Berlin: VDE Verlag.

Paetzold, K., & Kößler, J. (2014). A system integration method for the continuous support of the design process. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2014: 13th International Design Conference (pp. 1319–1328). Dubrovnik. Retrieved from https://www.designsociety.org/publication/35275/a_system_integration_method_for_the_continuous_support_of_the_design_process

Paetzold, K., & Meerkamm, H. (2005). Integrierte Produktentwicklung (IPE): Philosophie, Konzept und Umsetzung. In Festschrift zum Ehrenkolloquium anlässlich der Emeritierungen von Univ.-Prof. Dr.-Ing. Habil. Dr. h.c. Günter Höhne und Univ.-Prof. Dr.-Ing. Habil. Hans-Jürgen Schorcht. Ilmenau: ISLE.

Paetzold, K., & Nitsch, V. (2014). Beschreibung eines kompetenzorientierten Ansatzes für die Gestaltung technischer Unterstützungssysteme. In R. Weidner, T. Redlich, & J. P. Wulfsberg (Eds.), Erste transdisziplinäre Konferenz zum Thema „Technische Unterstützungssysteme, die die Menschen wirklich wollen“ (pp. 19–29). Hamburg: Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-48383-1

Paetzold, K., & Pelizäus-Hoffmeister, H. (2014a). Structuring of application fields for technology for elderly people from the user perspective. In International Conference on Human Behavior in Design. Ascona: Special Interest Group Human Behavior in Design (HBiD).

Paetzold, K., & Pelizäus-Hoffmeister, H. (2014b). Strukturierung von Anwendungsfeldern für Technik im Alltag Älterer aus der Nutzerperspektive. In Wohnen – Pflege – Teilhabe “Besser leben durch Technik”: 7. Deutscher AAL-Kongress mit Ausstellung. Berlin: VDE Verlag.

Paetzold, K., & Pöhlau, F. (2001a). Besonderheiten bei der Verzahnungsauslegung von Wellgetrieben. In G. W. Ehrenstein & P. Faatz (Eds.), Maschinenelemente aus Kunststoffen - Zahnräder und Gleitlager (pp. 115–127). Düsseldorf: Springer-VDI-Verlag.

Paetzold, K., & Pöhlau, F. (2001b). WAVE DRIVE-Getriebe: hochübersetzende Präzisionsgetriebe aus Kunststoff. Konstruktion : Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe, 53(6), 53–55.

Paetzold, K., & Reitmeier, J. (2010). Approaches for process attendant property validation of products. In P. Heisig, P. J. Clarkson, & S. Vajna (Eds.), Modelling and Management of Engineering Processes (pp. 27–38). London: Springer London. https://doi.org/10.1007/978-1-84996-199-8

Paetzold, K., Roger, F., & Clara, T. (2015). Concept and structure of a new master-programm “Systems Engineering.” In C. Weber, S. Husung, G. Cascini, M. Cantamessa, D. Marjanovic, & F. Rotini (Eds.), ICED15: 20th International Conference on Engineering Design (pp. 277–286). Milan. Retrieved from https://www.designsociety.org/publication/38018/concept_and_structure_of_a_new_master-programm_systems_engineering

Paetzold, K., & Schmid, U. (2008). To the development of a system architecture of cognitive technical systems. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2008: 10th International Design Conference. Dubrovnik. Retrieved from https://www.designsociety.org/publication/26683/to_the_development_of_a_system_architecture_of_cognitive_technical_systems

Paetzold, K., & Schweiger, W. (2001). About ideas and problems with the new course of study „Mechatronic“ at the University Erlangen/Nuremberg at the chair of engineering design. In Proceedings of the 1st Baltic Sea Workshop on Education in Mechatronics. Kiel.

Paetzold, K., & Schweiger, W. (2002). Entwurf mechatronischer Systeme: CEFE, CAD/CAM-Entwicklungsgesellschaft. CEFE-Arbeitsgruppe 19 Software-Engineering. CEFE-Arbeitsgruppe 35: Modellbildung und Simulation im Produktenwicklungsprozeß. Eichenau: CEFE.

Paetzold, K., & Schweiger, W. (2004). Ein Ansatz zur Organisation der Konzeptphase im interdisziplinären Entwicklungsprozess. In Profi-Forum Mechatronik, Funktions- und kostenoptimierte Systemlösungen. Regensburg.

Paetzold, K., Schweiger, W., & Schön, A. (2001). Integriertes Entwicklungskonzept für mechatronische Produkte. In D. Schröder (Ed.), Multi-Nature Systems: Vorträge des 3. ITG/GI/GMM Workshop (pp. 51–57). Hamburg: TUHH Technologie GmbH.

Paetzold, K., Schweiger, W., & Shi, B. (2002). Zur Generierung mechatronischer Produkte. In 47. Internationales wissenschaftliches Kolloquium. Ilmenau: Technische Universität Ilmenau.

Paetzold, K., Schweiger, W., & Shi, B. (2003). Ein Ansatz zur Organisation der Konzeptphase im interdisziplinären Entwicklungsprozess. In J. Gausemeier, J. Lückel, & J. Wallaschek (Eds.), Intelligente mechatronische Systeme: 1. Paderborner Workshop Intelligente Mechatronische Systeme. Paderborn: Heinz-Nixdorf-Institut.

Paetzold, K., Schweiger, W., & Zhu, J. (2002). Tribologische Untersuchungen am WAVE DRIVE®-Getriebe. In Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen ; Tribologie-Fachtagung.

Paetzold, K., & Stöber, C. (2007). Konzeption eines Hubarms für fotografische Aufnahmen in historischen Innenräumen. Bamberg.

Paetzold, K., & Stöber, C. (2009). An approach for consideration competences of elderly people in the development of technical systems. In M. Norell Bergendahl, M. Grimheden, L. Leifer, P. Skogstad, & U. Lindemann (Eds.), ICED09: 17th International Conference on Engineering Design (pp. 347–356). Palo Alto. Retrieved from https://www.designsociety.org/publication/28544/an_approach_for_consideration_competences_of_elderly_people_in_the_development_of_technical_systems

Paetzold, K., & Stuppy, J. (2005). Multidisziplinäre Ansätze zur Entwicklung kognitiver technischer Systeme. In P. Scharff (Ed.), Tagungsunterlagen 50. Internationales Wissenschaftliches Kolloquium. Retrieved from http://www.db-thueringen.de/servlets/DocumentServlet?id=17130

Paetzold, K., Wartzack, S., & Krause, D. (2014). Platform of design method for developing mobility-preserving products. Procedia CIRP, 21, 409–414. https://doi.org/10.1016/j.procir.2014.02.063

Paetzold, K., Wittmann, S., Stoll, T., & Helwig, S. (2007). Registration of measured and simulated nonideal geometry using optimization methods. In Proceedings of the 10th CIRP International Seminar on Computer Aided Tolerancing. Erlangen.

Paetzold, K., & Zhu, J. (2002). Gleitreibung und thermische Eigenschaften in einem WAVE DRIVE®-Getriebe. In Gleit- und Wälzlagerungen (Vol. 1706, pp. 585–595). Düsseldorf: VDI-Verlag.

Paetzold, K., Zhu, J., & Ruttor, M. (2002). Thermische Eigenschaften von Kunststoff/Metall-Gleitpaarungen. Materialprüfung (MP), 44(4), 135–138.

Reitmeier, J. (2015). Eigenschaftsorientierte Simulationsplanung: Ein Beitrag zur effizienten virtuellen Absicherung der Produktfunktionalität. Universität der Bundeswehr.

Reitmeier, J., Chahin, A., & Paetzold, K. (2015). An approach to the property-based planning of simulations. In C. Weber, S. Husung, G. Cascini, M. Cantamessa, D. Marjanovic, & F. Rotini (Eds.), ICED15: 20th International Conference on Engineering Design (Vol. 5, pp. 275–286). Milan, Italy: Design Society. Retrieved from https://www.designsociety.org/publication/37807/an_approach_to_the_property-based_planning_of_simulations

Reitmeier, J., & Paetzold, K. (2010). Property and behaviour based product description - component for a holistic and sustainable development process. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2010: 11th International Design Conference (pp. 1673–1680). Retrieved from https://www.designsociety.org/publication/29513/property_and_behaviour_based_product_description-component_for_a_holistic_and_sustainable_development_process

Reitmeier, J., & Paetzold, K. (2011). Evaluation of data quality in the context of continuous product validation throughout the development process. In S. J. Culley, B. . Hicks, T. C. McAloone, T. J. Howard, & J. Malmqvist (Eds.), ICED11: 18th International Conference on Engineering Design (pp. 143–152). Copenhagen. Retrieved from https://www.designsociety.org/publication/30792/evaluation_of_data_quality_in_the_context_of_continuous_product_validation_throughout_the_development_process

Reitmeier, J., & Paetzold, K. (2012a). Consideration of market-oriented business strategies within the knowledge system of Design for X (DfX). In B. Katzy, T. Holzmann, K. Sailer, & K.-D. Thoben (Eds.), 2012 18th International ICE Conference on Engineering, Technology and Innovation (pp. 1–10). München: IEEE. https://doi.org/10.1109/ICE.2012.6297661

Reitmeier, J., & Paetzold, K. (2012b). Effiziente Datenaufbereitung zur Simulationsplanung unter Ber. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2014: 25th Symposium on Design for X (pp. 275–288). Bamberg: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/35404/effiziente_datenaufbereitung_zur_simulationsplanung_unter_ber

Reitmeier, J., & Paetzold, K. (2012c). Reduction of uncertainty by sensitivity analysis and context-specifc data processing within virtual property validation. In NordDesign 2012. Retrieved from https://www.designsociety.org/publication/38581/reduction_of_uncertainty_by_sensitivity_analysis_and_context-specifc_data_processing_within_virtual_property_validation

Reitmeier, J., & Paetzold, K. (2012d). Use of methods of sensitivity analysis for simulation planning. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2012: 12th International Design Conference (pp. 551–560). Dubrovnik. Retrieved from https://www.designsociety.org/publication/32022/use_of_methods_of_sensitivity_analysis_for_simulation_planning

Reitmeier, J., & Paetzold, K. (2013). Process-integrated analysis of the development situation for an efficient simulation planning. In U. Lindemann, S. Venkataraman, Y. S. Kim, S. W. Lee, J. Clarkson, & G. Cascini (Eds.), ICED13: 19th International Conference on Engineering Design (pp. 61–68). Seoul. Retrieved from https://www.designsociety.org/publication/34830/process-integrated_analysis_of_the_development_situation_for_an_efficient_simulation_planning

Roth, M. A., Paetzold, K., & Roth, Z. (2013). Development and experimental investigation of a bionic tooth root contour. In International Conference on Gears: Europe invites the world (pp. 1315–1326).

Schmidt, J., Illés, M., & Paetzold, K. (2012). User centred design for mobility aids. In NordDesign 2012. Retrieved from https://www.designsociety.org/publication/38583/user_centred_design_for_mobility_aids

Schmidt, J., Karl, I., Paetzold, K., & Färber, B. (2011). Ansatz zur Entwicklung seniorengerechter Mobilitätssysteme unter Berücksichtigung technischer und sozialer Anforderungen. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2011: 22nd Symposium on Design for X (pp. 57–66). Tutzing: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/32439/ansatz_zur_entwicklung_seniorengerechter_mobilitätssysteme_unter_berücksichtigung_technischer_und_sozialer_anforderungen

Schmidt, J., Krüger, D., Eilmus, S., Paetzold, K., Wartzack, S., & Krause, D. (2012). Design for mobility - A methodical approach. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2012: 12th International Design Conference (pp. 1101–1110). Dubrovnik. Retrieved from https://www.designsociety.org/publication/32078/design_for_mobility-a_methodical_approach

Schmidt, J., & Paetzold, K. (2011). An approach for consideration of performance restrictions and aspects of acceptance in the product developement process. In N. Roozenburg, L.-L. Chen, & S. P. Jan (Eds.), Proceedings of IASDR2011: 4th World Conference on Design Research. Delft.

Schmidt, T. S., Böhmer, A. I., Wallisch, A., Paetzold, K., & Lindemann, U. (2017). Media Richness Theory in Agile Development: Choosing Appropriate Kinds of Prototypes to Obtain Reliable Feedback. In 23th International ICE Conference on Engineering, Technology and Innovation (ICE’17) (p. 27.-29. June). Madeira, Portugal.

Schmidt, T. S., Chahin, A., Kößler, J., & Paetzold, K. (2017). Agile Development and the Constraints of Physicality: A Network Theory-based Cause-and-Effect Analysis. In 21st International Conference on Engineering Design. Vancouver, Canada.

Schmidt, T. S., Guaragni, F., & Paetzold, K. (2016). Demerging agility, leanness, flexibility, reconfigurability and changeability: Towards a clear distinction. In 22th International ICE Conference on Engineering, Technology and Innovation (ICE’16) (p. 13.-15. June). Trondheim, Norwegen.

Schmidt, T. S., Lehnen, J., & Herstatt, C. (2015). Projektmanagement im Innovationsprozess: Analyse des Managements von Innovationsprojekten am Beispiel des Lead User-Ansatzes (No. 90). Hamburg. https://doi.org/10.13140/RG.2.1.3067.3369

Schmidt, T. S., & Paetzold, K. (2016). Agilität als Alternative zu traditionellen Standards in der Entwicklung physischer Produkte: Chancen und Herausforderungen. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), Design for X (DfX) Symposium (pp. 255–267). Hamburg, Germany: TuTech Verlag.

Schmidt, T. S., & Paetzold, K. (2017). Maturity Assessment of Teams Developing Physical Products in an Agile Manner. In 23th International ICE Conference on Engineering, Technology and Innovation (ICE’17) (p. 27.-29. June). Madeira, Portugal.

Schmidt, T. S., Paetzold, K., & Schmidt, T. S. (2016). Challenges of Agile Development : A Cause-and- Effect Analysis. In 7th International Conference on Complex Systems Design & Management. Paris, France: Springer.

Schmidt, T. S., Weiss, S., & Kristin, P. (2018). Agile Development of Physical Products: An Empirical Study about Motivations, Potentials and Applicability. Munich: University of the German Federal Armed Forces.

Schmidt, T., Weiss, S., & Paetzold, K. (2018). EXPECTED VS. REAL EFFECTS OF AGILE DEVELOPMENT OF PHYSICAL PRODUCTS: APPORTIONING THE HYPE. https://doi.org/10.21278/idc.2018.0198

Schönwald, J., Fleskes, J., Forsteneichner, C., & Paetzold, K. (2017). Analyse der Daten- und Informationsflüsse im Produktentstehungsprozess eines OEMs. In DFX 2017: Proceedings of the 28th Symposium Design for X (pp. 2–12). Bamberg, Germany.

Schweiger, W., & Paetzold, K. (2003). Ein Ansatz zum Festigkeitsnachweis für den Flexring im WAVE DRIVE®-Getriebe. In Dresdner Maschinenelemente Kolloquium. Dresden.

Schweiger, W., Paetzold, K., & Shi, B. (2002). Produkt und Prozesse aus der Sicht der Modellbildung und Simulation. In H. Meerkamm (Ed.), DFX 2002: 13th Symposium on Design for X (pp. 207–214). Retrieved from https://www.designsociety.org/publication/27589/produkt_und_prozesse_aus_der_sicht_der_modellbildung_und_simulation

Sop Njindam, T. (2015). A systemic approach to analyze failures of complex multidisciplinary systems on the basis of their weak emergent behaviour. Universität der Bundeswehr.

Sop Njindam, T., Metzler, T., Lindemann, U., & Paetzold, K. (2013). A model-based assessment for the solution space of a cognitive coffee robot waiter. In M. Aiguier, F. Boulanger, D. Krob, & C. Marchal (Eds.), Complex Systems Design & Management Conference CSD&M 2013 – CEUR Workshop (pp. 45–57). Paris. Retrieved from http://mediatum.ub.tum.de/node?id=1188719

Sop Njindam, T., Metzler, T., Paetzold, K., & Shea, K. (2011). Integrating failure analysis into the conceptual design of cognitive products: Towards a new paradigm. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2011: 22nd Symposium on Design for X (pp. 153–170). Tutzing: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/32447/integrating_failure_analysis_into_the_conceptual_design_of_cognitive_products_towards_a_new_paradigm

Sop Njindam, T., Nemetzade, T., & Forstner, R. (2013). Anwendung der Wertebereichsvariation am Beispiel des Energieversorgungssystems eines Satelliten. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2013: 24th Symposium on Design for X (pp. 71–84). Hamburg: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/35377/anwendung_der_wertebereichsvariation_am_beispiel_des_energieversorgungssystems_eines_satelliten

Sop Njindam, T., & Paetzold, K. (2010a). An investigation of the reliability of fault tolerant cognitive technical systems. In K. Mainzer (Ed.), ECAP10, VIII European Conference on Computing and Philosophy. München.

Sop Njindam, T., & Paetzold, K. (2010b). Herausforderung der Entwicklung zuverlässiger kognitiver Produkte. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2010: 21st Symposium on Design for X (pp. 71–82). Hamburg: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/30030/herausforderung_der_entwicklung_zuverl%E4ssiger_kognitiver_produkte

Sop Njindam, T., & Paetzold, K. (2011). Design for reliability: An event- and function-based framework for failure behavior analysis in the conceptual design of cognitive products. In S. J. Culley, B. . Hicks, T. C. McAloone, T. J. Howard, & J. Malmqvist (Eds.), ICED11: 18th International Conference on Engineering Design (pp. 228–235). Copenhagen. Retrieved from https://www.designsociety.org/publication/30595/design_for_reliability_an_event-and_function-based_framework_for_failure_behavior_analysis_in_the_conceptual_design_of_cognitive_products

Sop Njindam, T., & Paetzold, K. (2012). A new integrated approach to improve the robustness of complex multi-disciplinary systems. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2012: 12th International Design Conference (pp. 1803–1810). Dubrovnik. Retrieved from https://www.designsociety.org/publication/32149/a_new_integrated_approach_to_improve_the_robustness_of_complex_multi-disciplinary_systems

Sop Njindam, T., Platen, E., & Paetzold, K. (2012). Modellbasiertes Systems Engineering zur frühzeitigen Absicherung komplexer multidisziplinärer Systeme. München.

Stäbler, M. (2016a). Implementing Changeability in a System with Prioritization Indicators. In 6th CIRP Conference on Assembly Technologies and Systems (CATS).

Stäbler, M. (2016b). LITERATURE REVIEW OF EXISITING EVALUATION METHODS IN THE CONTEXT OF CHANGEABILITY. In Design 2016.

Stäbler, M., Weber, J., & Paetzold, K. (2017). Adapt!Evaluation - Evaluation for Design and Re-Design of Production Systems based on Axiomatic Design. In MATEC Web of Conferences (Vol. 127). https://doi.org/10.1051/matecconf/201712701012

Stäbler, M., Weber, J., Paetzold, K., & Vielhaber, M. (2017). Holistic approach for design and re-design of production units. In 21st International Conference on Engineering Design (Vol. 1).

Stöber, C., Schmidt, J., Wartzack, S., Paetzold, K., & Meerkamm, H. (2010). Modularisierungsstrategie für Produkte für leistungseingeschränkte Personen. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2010: 21st Symposium on Design for X (pp. 205–222). Hamburg: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/30041/modularisierungsstrategie_für_produkte_für_leistungseingeschränkte_personen

Stoll, T., & Paetzold, K. (2008). Gap and flush visualization of virtual nonideal prototypes. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2008: 10th International Design Conference (pp. 681–688). Dubrovnik. Retrieved from https://www.designsociety.org/publication/26707/gap_and_flush_visualization_of_virtual_nonideal_prototypes

Thierry Sop Njindam, T. M. K. P. und K. S. (2011). Integrating Failure Analysis into the Conceptual Design of Cognitive Products: Towards a New Paradigm. In DFX 2011 - 22nd Symposium on Design for X. Retrieved from https://www.designsociety.org/publication/32447/integrating_failure_analysis_into_the_conceptual_design_of_cognitive_products_towards_a_new_paradigm

Tremmel, S., Paetzold, K., Meerkamm, H., & Walla, W. (2007). Numerical Investigations of the Stress Condition in Thin Coated Contacts Using Finite Elementes Simulations. In F.-W. Bach (Ed.), The Coatings 2007: 6th International Conference. Hannover: PZH Produktionstechnisches Zentrum.

Wallisch, A., & Paetzold, K. (2017). User Integration in Design : Applying Social Science Research Questions for Successful Participation Management at Every Product Development Step. 11th International Workshop on Integrated Design Engineering, 39–48.

Wallisch, A., & Paetzold, K. (2018). A qualitative inventory of user integration methods and their usage in product development research and practice. In International DESIGN Conference, DESIGN 2018 (pp. 115–126). Dubrovnik. https://doi.org/10.21278/idc.2018.0235

Wallisch, A., Stieg, T., Paetzold, K., & Briede, J. C. (2018). ASSESSING USER NEEDS BY EXPLORING DAILY ACTIONS OF ELDERLY PEOPLE IN THEIR HOME ENVIRONMENT IN CHILE. International DESIGN Conference, DESIGN 2018. https://doi.org/10.21278/idc.2018.0348

Walter, J., & Paetzold, K. (2014). Darstellung der Herausforderungen einer ganzheitlichen Nutzerbeschreibung. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2014: 25th Symposium on Design for X (pp. 87–98). Bamberg: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/36713/darstellung_der_herausforderungen_einer_ganzheitlichen_nutzerbeschreibung

Walter, J., Paetzold, K., & Nitsch, V. (2015). Description of a competence oriented approach for designing technical assistance systems. In C. Weber, S. Husung, & M. Cantamessa (Eds.), ICED15: 20th International Conference on Engineering Design (Vol. 9, pp. 57–64). Milan, Italy: Design Society. Retrieved from https://www.designsociety.org/publication/38125/description_of_a_competence_oriented_approach_for_designing_technical_assistance_systems

Walter, J., Schweiger, P., Birken, T., Paetzold, K., & Pelizäus-Hoffmeister, H. (2015). Beschreibung der Nutzer von technischen Systemen für Ältere – eine interdisziplinäre Herausforderung. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DFX 2015: 26th Symposium on Design for X (pp. 51–62). Herrsching: TuTech Verlag. Retrieved from https://www.designsociety.org/publication/38390/beschreibung_der_nutzer_von_technischen_systemen_für_ältere_–_eine_interdisziplinäre_herausforderung

Weber, J., Förster, D., Kößler, J., & Paetzold, K. (2015). Design of Changeable Production Units within the Automotive Sector with Axiomatic Design. In Procedia CIRP. https://doi.org/10.1016/j.procir.2015.07.006

Weber, J., Kößler, J., & Paetzold, K. (2015a). An approach for industrial application of axiomatic design. In C. Weber, S. Husung, M. Cantamessa, G. Cascini, D. Marjanovic, & S. Venkataraman (Eds.), ICED15: 20th International Conference on Engineering Design (Vol. 2, pp. 97–106). Milan, Italy: Design Society. Retrieved from https://www.designsociety.org/publication/37692/an_approach_for_industrial_application_of_axiomatic_design

Weber, J., Kößler, J., & Paetzold, K. (2015b). An Approach for Industrial Application of Axiomatic Design. In Proceedings of the 20th International Conference on Engineering Design (ICED15) (pp. 97–106). Milan.

Weber, J., Stäbler, M., Baumgartl, J., & Paetzold, K. (2016). Mobile Assembly Units as Enabler for Changeable Assembly Lines. In Procedia CIRP, Volume 44 (pp. 383–388). Retrieved from http://www.sciencedirect.com/science/article/pii/S2212827116003115

Weber, J., Stäbler, M., Thielen, S., & Paetzold, K. (2016). Modularity as Key Enabler for Scalability of Final Assembly Units in the Automotive Sector. In Procedia CIRP, Volume 57 (p. Pages 224-228). Retrieved from http://www.sciencedirect.com/science/article/pii/S2212827116311933

Westphal, Christoph ; Krehmer, Hartmut ; Wartzack, Sandro ; Paetzold, Kristin ; Meerkamm, H. (2009). Potentiale einer eigenschaftsbasierten Produktbeschreibung. In R. Brökel, Klaus; Feldhusen, Jörg; Grote, Karl-Heinrich; Rieg, Frank; Stelzer (Ed.), Vernetzte Produktenentwicklung: 7. Gemeinsames Kolloquium Konstruktionstechnik (pp. 1–8). Bayreuth.

Westphal, C., Krehmer, H., & Paetzold, K. (2009). New ways of data processing for increasing of the efficiency within the product developement. In 1. International Conference on Collaborative Mechatronic Engineering (ICCME). Salzburg.

Westphal, C., Krehmer, H., Paetzold, K., Sandro, W., & Meerkamm, H. (2009). Produktmodell zur multidisziplinären Beschreibung des Produktverhaltens und seiner Eigenschaften. In 1. International Conference on Collaborative Mechatronic Engineering (ICCME). Salzburg.

Westphal, C., Meerkamm, H., Wartzack, S., & Paetzold, K. (2009). New ways of data processing for increasing of the efficiency within the product development. In M. Norell Bergendahl, M. Grimheden, L. Leifer, P. Skogstad, & U. Lindemann (Eds.), ICED09: 17th International Conference on Engineering Design (pp. 105–114). Palo Alto. Retrieved from https://www.designsociety.org/publication/28773/new_ways_of_data_processing_for_increasing_of_the_efficiency_within_the_product_development

Winter, F., Landkammer, S., Hornfeck, R., Heß, P., & Paetzold, K. (2016). Optimized Leg Proportion to Enhance Rough Terrain Mobility of a Biomimetic Walking Robot. In Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16) (pp. 320–327). Belgrade, Serbia.

Winter, F., Schneider, D., Landkammer, S., Hornfeck, R., Heß, P., & Paetzold, K. (2017). Robustheitssteigerung von Laufrobotern bezüglich der Unebenheit des Terrains. In DFX 2017: Proceedings of the 28th Symposium Design for X (pp. 87–98). Bamberg.

Wittmann, S., Stockinger, A., Stoll, T., & Paetzold, K. (2008). A system for haptic tolerance analysis regarding non-ideal geometry. In D. Marjanovic, M. Storga, N. Pavkovic, & N. Bojcetic (Eds.), DESIGN 2008: 10th International Design Conference (pp. 729–736). Dubrovnik. Retrieved from https://www.designsociety.org/publication/26733/a_system_for_haptic_tolerance_analysis_regarding_non-ideal_geometry

Wittmann, S., Stoll, T., & Paetzold, K. (2007). Volume visualization of geometric deviations. In ICED07: 16th International Conference of Engineering Design (pp. 113–114). Paris. Retrieved from https://www.designsociety.org/publication/25378/volume_visualization_of_geometric_deviations

Wittmann, S., Winter, M., & Paetzold, K. (2009). Assembly simulation for toleranced parts: An adaptes path planning approach. In M. Norell Bergendahl, M. Grimheden, L. Leifer, P. Skogstad, & U. Lindemann (Eds.), ICED09: 17th International Conference on Engineering Design (pp. 359–370). Palo Alto. Retrieved from https://www.designsociety.org/publication/28707/assembly_simulation_for_toleranced_parts_an_adaptes_path_planning_approach

Zhu, J., Paetzold, K., & Schweiger, W. (2003). Tribologische Untersuchungen am WAVE DRIVE®-Getriebe. Tribologie Und Schmierungstechnik (T + S), 50(3), 23–27.

(“About The Importance Of Modelling And Simulation For Cognitive Technical Systems.,” n.d.; “Flexible Process Execution within Product Development Projects - the ProcessNavigator,” n.d.; Bauer & Paetzold, 2006; Braun, Kreimeyer, Kopal, & Paetzold, 2017; Chahin & ???, 2016; Chahin, Hoffmeister, Paetzold, Noori, & Cardona, 2016; Chahin, Hoffmeister, Paetzold, & Salehi, 2016; Chahin & Paetzold, 2015; Chamas & Paetzold, 2018; Erbe, Weber, & Paetzold, 2011; C. Forsteneichner, Metschkoll, & Paetzold, 2016; Christian Forsteneichner, Paetzold, & Metschkoll, 2015; Gericke, Meißner, & Paetzold, 2013; Guaragni, Schmidt, & Paetzold, 2016; Hochmuth & Paetzold, 2001; Jahn, Paetzold, & Gaudl, 2016; Kahlert, Paetzold, & Schweiger, 2003; Kößler & Paetzold, 2014, 2015b, 2015a, 2016a, 2016b, 2017, Kößler, Reitmeier, & Paetzold, 2014b, 2014a; Krehmer & Paetzold, 2008; Krüger et al., 2011, 2013; Lehnen, Schmidt, & Herstatt, 2016; Luft, Reitmeier, Wartzack, & Kristin, 2014; Meerkamm & Paetzold, 2003; Meerkamm, Paetzold, Schweiger, & Shi, 2002; Nitsch & Paetzold, 2015; M. Omiciuolo, Paetzold, Baader, Thiel, & Förster, 2016; Manolo Omiciuolo, Thiel, Forster, Paetzold, & Forstner, 2015; Paetzold, 2000a, 2000b, 2004b, 2004a, 2004c, 2005, 2006d, 2006b, 2006c, 2006a, 2007a, 2007c, 2007b, 2008, 2009, 2011a, 2011b, 2012, 2015; Paetzold & Erzigkeit, 2007; Paetzold & Höfner, 2014; Paetzold & Klämpfl, 2009; Paetzold & Kößler, 2014; Paetzold & Meerkamm, 2005; Paetzold & Nitsch, 2014; Paetzold & Pelizäus-Hoffmeister, 2014a, 2014b, Paetzold & Pöhlau, 2001b, 2001a; Paetzold & Reitmeier, 2010; Paetzold, Roger, & Clara, 2015; Paetzold, Schweiger, & Schön, 2001; Paetzold, Schweiger, & Shi, 2003; Paetzold, Wartzack, & Krause, 2014; Paetzold, Wittmann, Stoll, & Helwig, 2007; Paetzold & Schmid, 2008; Paetzold & Schweiger, 2001, 2002, 2004; Paetzold, Schweiger, & Shi, 2002; Paetzold, Schweiger, & Zhu, 2002; Paetzold & Stöber, 2007, 2009; Paetzold & Stuppy, 2005; Paetzold & Zhu, 2002; Paetzold, Zhu, & Ruttor, 2002; Reitmeier, 2015; Reitmeier, Chahin, & Paetzold, 2015; Reitmeier & Paetzold, 2010, 2011, 2012d, 2012b, 2012c, 2012a, 2013; Roth, Paetzold, & Roth, 2013; J. Schmidt, Krüger, et al., 2012; J. Schmidt, Illés, & Paetzold, 2012; J. Schmidt, Karl, Paetzold, & Färber, 2011; J. Schmidt & Paetzold, 2011; T. S. Schmidt, Böhmer, Wallisch, Paetzold, & Lindemann, 2017; T. S. Schmidt, Chahin, Kößler, & Paetzold, 2017; T. S. Schmidt, Guaragni, & Paetzold, 2016; T. S. Schmidt, Lehnen, & Herstatt, 2015; T. S. Schmidt, Weiss, & Kristin, 2018; T. S. Schmidt & Paetzold, 2016, 2017; T. S. Schmidt, Paetzold, & Schmidt, 2016; T. Schmidt, Weiss, & Paetzold, 2018; Schönwald, Fleskes, Forsteneichner, & Paetzold, 2017; Schweiger & Paetzold, 2003; Schweiger, Paetzold, & Shi, 2002; Sop Njindam, 2015; Sop Njindam, Metzler, Lindemann, & Paetzold, 2013; Sop Njindam, Metzler, Paetzold, & Shea, 2011; Sop Njindam, Platen, & Paetzold, 2012; Sop Njindam, Nemetzade, & Forstner, 2013; Sop Njindam & Paetzold, 2010a, 2010b, 2011, 2012, Stäbler, 2016b, 2016a; Stäbler, Weber, & Paetzold, 2017; Stäbler, Weber, Paetzold, & Vielhaber, 2017; Stöber, Schmidt, Wartzack, Paetzold, & Meerkamm, 2010; Stoll & Paetzold, 2008; Thierry Sop Njindam, 2011; Tremmel, Paetzold, Meerkamm, & Walla, 2007; A Wallisch & Paetzold, 2018; A Wallisch, Stieg, Paetzold, & Briede, 2018; Anne Wallisch & Paetzold, 2017; Walter & Paetzold, 2014; Walter, Paetzold, & Nitsch, 2015; Walter, Schweiger, Birken, Paetzold, & Pelizäus-Hoffmeister, 2015; Weber, Förster, Kößler, & Paetzold, 2015; Weber, Kößler, & Paetzold, 2015b, 2015a; Weber, Stäbler, Baumgartl, & Paetzold, 2016; Weber, Stäbler, Thielen, & Paetzold, 2016; Westphal, Christoph ; Krehmer, Hartmut ; Wartzack, Sandro ; Paetzold, Kristin ; Meerkamm, 2009; Westphal, Krehmer, & Paetzold, 2009; Westphal, Krehmer, Paetzold, Sandro, & Meerkamm, 2009; Westphal, Meerkamm, Wartzack, & Paetzold, 2009; F. Winter, Landkammer, Hornfeck, Heß, & Paetzold, 2016; Florian Winter et al., 2017; Wittmann, Stockinger, Stoll, & Paetzold, 2008; Wittmann, Stoll, & Paetzold, 2007; Wittmann, Winter, & Paetzold, 2009; Zhu, Paetzold, & Schweiger, 2003)